Outside dimensions for 3D printed housing

snickerdoodle general
1
Could you post the outside dimensions (width, length, thickness) of the snickerdoodle board?

I would like to 3d Print a housing that would include mounting holes for mounting snickerdoodle to a quadcopter of robot.

Regards,
Karl
2
Hi Karl,

I've just uploaded a rough mechanical drawing of snickerdoodle (both connectors up and connectors down versions) to GitHub:

https://github.com/krtkl/snickerdoodle-model/blob/master/DWG/snickerdoodle-2016.02.17.PDF

This should at least give you a starting point. We'll be updating these with more detail - as well as adding 3D models of snickerdoodle (3D PDFs and IGS files) and all baseboards to the public repository in the near future.

Also, you may have seen it already but we do have an enclosure for the 'connectors up' snickerdoodle: http://snickerdoodle.io (scroll down/search for "cookieJar enclosure").

We don't have a lot of details posted right now but that will also allow you to mount snickerdoodle as you describe. The plan is to publish the enclosure design/models as well so everyone can 3D print it at home, for example. There are a couple minor tweaks left to make there before pushing out, but it's in the queue...

Hope that helps!
Ryan

On Sunday, March 20, 2016 at 11:33:14 AM UTC-7, kapers601@gmail.com wrote:
Could you post the outside dimensions (width, length, thickness) of the snickerdoodle board?

I would like to 3d Print a housing that would include mounting holes for mounting snickerdoodle to a quadcopter of robot.

Regards,
Karl